Saturday, October 25, 2008

Engineers Log C-124 Flight Wake Island to Hickam, HI.


This is a little off the topic but I find these old forms and log's quite interesting. Here is an old C-124 Engineers log from a flight from Wake Island to Hickam AFB, Hawaii. 14 November 1969, On A 19th MAS (Military Airlift Squadron) 62 nd Wing, out of McChord AFB, Washington.
I was an aircraft Mechanic in the 19th MAS at Kelly AFB , Texas 1968-70 on these great old birds called The "Old Shakey". This form gives a good look at the Engineers Performance Log. We phased out most of our aircraft in early 1970

What a great old bird, as an aircraft electrician we worked on many systems, I use to love to crawl through the wing from the inboard engines to the outboard engines, entering in P compartment below deck.

These logs have a great wealth of info for the hard core enthusiast who enjoys looking at fuel flows, gross weight's and engine performance. I have a few C-141 flights also, that I will post later.

I remember this particular aircraft very well we called her "Balls 01" , for she had continual generator and voltage regulator problems, she was a real problem to parallel the generators

Also included here is how to read these log's if you are not familiar with them.



Monday, October 20, 2008

Haulin Cargo On A C-46


46's On The Flight Line At St. Petersburg, Airport Florida
Tag Photo to enlarge

Here is a little photo essay of another favorite work horse of the air the C-46 Curtis Commando.
TheSE pictures are from a photo album I got on ebay. They are from Aerovias Sud Americana, Inc. Seems this company was based out of St. Petersburg Florida and flew cargo routes into Central America with C-46 Commandos, DC-4's and DC-6's.
ASA as the airline was known operated from 1948 until 1965 when it went out of business. I can't find much about the operations.
Anyway the pictures are pretty good of some of the cargo hauled on this great old bird.

Now that is a tight fit !


Looks Like some of the cargo we hauled on the C7A in Vietnam


Tuesday, October 7, 2008

ONA Flight Engineers Log

Actual Log From Overseas National Airways ONA
TAG on photo to enlarge

The flight Engineer’s responsibility in the operation of a four engine aircraft is such that it demands a complete understanding of the entire aircraft and its basic systems. The engineer was also required to keep an up to date log. Following is an actual Flight Engineers log from Overseas National Airways for piston engine aircraft.

Tag photo to enlarge.
Guide for filling out the Engineers log

Thursday, October 2, 2008

Airline Maintenance Routing




26 percent of an airlines personnel are engaged in the maintenance of their aircraft. Trying to keep the airlines aircraft fleet in a flying condition was a herculean task. The mechanics and specialist who maintain the fleet had to meet exacting standards.
Safety in flight is dependent not only on the flight crew, but also those ground crew who keep the aircraft mechanically fit. The flight crew’s only way of knowing the airworthiness of their aircraft is to check for the signatures and work sheets, and inspection forms of every aircraft.
Maintenance plays a major role in the routing of aircraft so that each and every plane will receive its routine maintenance and its periodic inspections at each an every stop. These inspections which progressively cover every aircraft part, system, component and accessory in the life of the plane between its major overhaul periods call for an intricate planning and the provisioning of adequate parts through out the airlines system.
During the 1940-50 American Airlines had five class 1 or major stations for the performance of major repair work and inspections. They were located at Tulsa, Chicago, Los Angeles, Fort Worth, and New York. They had 15 class ll stations where terminating checks, pre flight checks and minor repairs were executed.
In 1947 American Airlines occupied three hangars with shop facilities at La Guardia Field, New York. They could conduct base maintenance on DC-3 and DC-4 aircraft. They included major inspections, major repairs, overhauling accessories, propellers, instruments, radio and electrical changes for DC-3 aircraft equipped with Pratt& Whitney 1830 engines. They also include all DC-4 engine changes. They also stocked parts for all their DC-4 aircraft. Similar hangars were equipped at Fort Worth and Tulsa.

Aircraft Routing
How it’s done.

The routing of all company aircraft throughout the entire airline system so that each plane will arrive, in accordance with predetermined schedules, at precisely the right station and at the right time for the right periodic inspection or overhaul, as it falls due, is a job that requires meticulous attention to a multitude of details.
Flight terminations must be staggered to avoid having aircraft off schedule awaiting maintenance at work stations. A plane due for an engine change must be routed through to a station that is equipped to perform the change.
Planes must be made available for crew training, spares, extra sections to meet peak loads, engineering tests, modifications etc. These and many more considerations must all be taken into account and molded together so there will be no conflict with or disruption flight arrival and departure times.
These activities were the responsibility of the aircraft routing control office. And imagine they did this with out the use of computers! They were highly skilled personnel who manually prepared the routing charts for each type of equipment taking into account the most effective utilization of both the shop facilities and the aircraft. The charts they prepared presented complete routings for each aircraft through the airlines system. The charts included the assignment of aircraft by stations, with the number scheduled in reserve, undergoing maintenance, engine changes or modifications. Also, hours scheduled daily by routes with organizations and terminations and monthly totals for the planes actual hours flown. Once again we must remember they did this without the use of computers!
Posted on large control boards was the vital information presenting at a glance a complete picture of the maintenance schedules for the entire fleet. The work to be done, work scheduled for different stations etc. On aircraft status boards are recorded the actual accomplishment for each day.



General Purpose

To replenish the supply of fuel, oil, alcohol, or hydraulic fluid as required.
To do any maintenance work necessary to make the ship airworthy.

Procedure on Arrival:
1. Install tail post, main gear blocks, and nose gear safety pin wheel blocks and battery cart immediately after the propellers have stopped turning.
2. Check pilot complaints; correct those which in the opinion of the supervisor affect the airworthiness of the aircraft. And sign forms.
3. Stick check the quantity of the gasoline determine the fuel load, and check the quantity of oil in the tank.
4. Check quantity of hydraulic fluid in the main and aux tanks.
5. Perform a walk around inspection of the aircraft using the following guide.
A. Visually inspect both wings for general condition of the skin surface de-ices and aileron control surfaces.
B. Visually inspect each engine for hyd, oil or fuel leaks, Birds, paper etc lodged in the air scoops, nicks on the props or anti icer feed shoes.
C. Visually check left wheel and gear for general condition, also strut.
D. Visually check nose wheel and gear for general condition also strut.
E. Visually check the right well and gear for general condition, and strut
F. Check each flap for damage.
G. Check fuselage skin for signs of damage.
H. Check the tail group for general condition and signs of damage.

Procedure Before Departure:

1. Perform visual pre departure check of the airplane using the following as a guide.
A. Visually check oil, gas caps for security
B. Remove serving ladders from the wings
C. Plug battery cart in and position clear of the props.
D. Remove all ground equipment and close cabin doors.
E. Remove the tail post position the fire guard
F. Ship clear, start engines.
G. Remove battery cart.
H. Remove gear blocks, and nose gear pin.
I. Remove wheel chocks.
J. Dispatch Airplane, “All Clear.”

Tag on Photo to enlarge.


This particular aircraft during the last month, 31 days chalked up 244.10 hours of maintenance layover time, 384.20 hours of ramp to ramp time and 518.10 hours total elapsed time resulting in 12.23 hours per day utilization. During this period it was routed throughout 27 stations from coast to coast, and into Mexico visiting each the following number of times; New York 31, Los Angeles 8, Chicago 15, Mexico City 3, Newark, 2 Detroit 2, Dallas 15, Washington 19, Boston 13, Nashville 4, Little rock 2, Oklahoma City 6, Cincinnati 4, Indianapolis 2, St. Louis 10, San Antonio 3, Monterey 5, El Paso 4, Tucson 3, Phoenix 3, Tulsa 10, Buffalo 3, Philadelphia 2, Memphis 3, Knoxville 1, San Diego 1, and Fort Worth 2. It received 151 Service inspections, (one at each station where no other inspection was given), 14 Pre Flight Inspections, 6 No. 1 periodic inspections, 3 No. 2 periodic inspections 1 No. 3 inspection and 1 No. 9 inspection with all engines changed. That’s a total of 176 maintenance inspections during a single month of operation of which 14 were pre flight inspections and 11 were periodic inspections.
This is but a single example of the maintenance work done on a single ship in a comparatively short period. When one considers that a similar work is at the same time being carried out on every other aircraft in the airlines fleet according to its position in the maintenance cycle some realization is had of the tremendous job that maintenance must perform in keeping every plane airworthy and in perfect mechanical condition. Also the major role it plays in contributing to the safety of scheduled air transportation.